4 Runner SR5 2WD V6-3.4L (5VZ-FE) (1997)
2.
Remove any dirt, grease, oil, silicone, etc. from inside the door glass run channel and the mating surface of the door glass run weatherstrip using a
solvent/cleaner*.
*
3M Prep Solvent 70
(P/N 08973 or equivalent)
*
Kent Acrysol (Aerosol)
(P/N 60170 or equivalent)
3.
Apply adhesive* (glue) to both mating surfaces according to the manufacturer's instructions.
*
3M Super Weatherstrip Adhesive
(P/N 051135-08008 or equivalent)
*
Kent Ultra-Stick tube
(P/N 10192 or equivalent)
4.
Reinstall the.door glass run weatherstrip.
5.
Hold the lip of the door glass run weatherstrip in place against the door frame with a strong adhesive tape.
6.
When adhesive (glue) is dry, carefully peel away the adhesive tape and remove any excess glue residue from the edges of the door frame using a
adhesive cleaner*.
*
3M General Purpose Adhesive Cleaner
(P/N 051135-08984 or equivalent)