Avalon V6-3.0L (1MZ-FE) (1996)
Idle Speed: Testing and Inspection
1. INITIAL CONDITIONS:
-
Engine at normal operating temperature
-
Air cleaner installed
-
All pipes and hoses of air induction system connected
-
All accessories switched OFF
-
All vacuum lines (for EGR system, etc.) properly connected
-
SFI system wiring connectors fully plugged
-
Ignition timing check correctly
-
Transmission in neutral position
-
Air conditioning switched OFF
2. CONNECT TOYOTA HAND-HELD TESTER OR OBD II SCAN TOOL.
-
Remove the fuse cover on the instrument panel.
-
Connect the Toyota hand-held tester or OBD II scan tool to the DLC3.
-
Please refer to the Toyota hand-held tester or OBD II scan tool operator's manual for further details.
3. INSPECT IDLE SPEED
-
Race the engine speed at 2,500 rpm for approx. 90 seconds, then return to idle.
-
Check the idle speed.
Idle speed: 700 ± 50 rpm
-
If the idle speed is not as specified, check the IAC valve and air intake system.
4. DISCONNECT TOYOTA HAND-HELD TESTER OR OBD II SCAN TOOL.