Avalon V6-3.0L (1MZ-FE) (1996)
-
Using an ohmmeter, check that there is continuity between the terminals.
Resistance At 20°C (68°F): 33 - 39 Ohms
-
If there is no continuity, replace the VSV.
4. INSPECT VSV FOR GROUND
-
Using an ohmmeter, check that there is no continuity between each terminal and the body.
-
If there is continuity, replace the VSV.
5. INSPECT VSV OPERATION.
-
Check that air flows from port E to port G.
-
Apply battery positive voltage across the terminals.
-
Check that air flows from port E to the filter.
-
If operation is not as specified, replace the VSV.
6. REINSTALL VSV.
-
Install the VSV with the screw.
-
Connect the 2 vacuum sensing hoses to the VSV.