Avalon V6-3.0L (1MZ-FE) (1996)
Fuel Pump Relay: Testing and Inspection
CIRCUIT OPENING RELAY INSPECTION
1. REMOVE CIRCUIT OPENING RELAY.
2. INSPECT RELAY CONTINUITY.
-
Using an ohmmeter, check that there is continuity between terminals 86 and 85.
-
Check that there is no continuity between terminals 87 and 30.
-
If there is continuity, replace the relay.
3. INSPECT RELAY OPERATION.
-
Apply battery positive voltage across terminals 86 and 85.
-
Using an ohmmeter, check that there is continuity between terminals 87 and 30.
-
If there is no continuity, replace the relay.
3. REINSTALL CIRCUIT OPENING RELAY.