Avalon V6-3.0L (1MZ-FE) (1996)
Vacuum Reservoir: Testing and Inspection
INSPECT VACUUM TANK
LOCATION: The LH side member under the battery tray.
-
Check that air flows from port B to port A.
-
Check that air does not flow from port A to port B.
-
Plug port B with your finger, and apply 26.7 kPa (200 mmHg, 7.9 in.Hg) of vacuum to port A, and check that there is no change is vacuum after
one minute.
-
If the operation is not as specified, replace the vacuum tank.