Avalon V6-3.0L (1MZ-FE) (1996)
/Page-1242001.png)
Transmission Position Switch/Sensor: Service and Repair
PARK/NEUTRAL POSITION SWITCH REPLACEMENT
1. REMOVE AIR CLEANER ASSEMBLY
2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
3. REMOVE PARK/NEUTRAL POSITION SWITCH
-
Remove the nut and disconnect the control cable.
-
Remove the nut, washer and transaxle control shaft lever.
-
Pry off the lock plate and remove the nut.
-
Remove the 2 bolts and park/neutral position switch.
4. INSTALL AND ADJUST PARK/NEUTRAL POSITION SWITCH
-
Install the park/neutral position switch with the 2 bolts.
-
Install a new lock plate and nut.
-
Stake the nut with the lock plate.