Avalon V6-3.5L (2GR-FE) (2006)
/Page-1243007.png)
31. REMOVE COOLING UNIT MOTOR SUB-ASSEMBLY W/FAN
a. Remove the 3 screws and cooling unit motor sub-assembly w/fan.
32. INSTALL COOLER EVAPORATOR SUB-ASSEMBLY NO.1
a. Sufficiently apply compressor oil (ND-OIL 8) to 2 new Orings and the fitting surface. Install the 2 O-rings to the. cooler evaporator No.1.
Compressor oil: ND-OIL 8 or equivalent
33. INSTALL COOLER EXPANSION VALVE
a. Using a hexagon wrench 4 mm, install the cooler expansion valve with the 2 hexagon bolts.
Torque: 3.5 N.m (35 kgf.cm, 30 in.lbf)