toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Engine Controls - DTC P0500/MIL ON|Page 7752 > < Engine Controls - DTC P0500/MIL ON|Page 7750
Page 5
background image

NOTE:
-

Do not apply excessive force to the heater water outlet hose A.

-

Prepare a drain pan or cloth in case the cooling water leaks.

11. DISCONNECT HEATER WATER INLET HOSE A

a. Slide the clip and disconnect the heater water inlet hose A.

NOTE:
-

Do not apply excessive force to the heater water inlet hose A.

-

Prepare a drain pan or cloth in case the cooling water leaks.

12. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY W/FRONT PASSENGER AIRBAG ASSEMBLY 

HINT:  Refer to the removal procedures for the instrument panel safety pad sub-assembly w/ front passenger airbag assembly.

13. REMOVE HEATER TO REGISTER DUCT NO.2

a. Remove the 3 clips and heater to register duct No.2.

14. REMOVE HEATER TO REGISTER DUCT ASSEMBLY NO.6

a. Disengage the 4 claws and then remove the heater to register duct No.6

15. REMOVE CONSOLE BOX DUCT NO.1

a. Remove the clip and console box duct No.1.

Engine Controls - DTC P0500/MIL ON|Page 7752 > < Engine Controls - DTC P0500/MIL ON|Page 7750