Avalon V6-3.5L (2GR-FE) (2006)
a. For an open circuit in the wire harness in Fig. 1, perform a resistance check (step b) or a voltage check (step c).
b. Check the resistance.
1. Disconnect connectors A and C and measure the resistance between them.
HINT: Measure the resistance while lightly shaking the wire harness vertically and horizontally.
If your results match the examples above, an open circuit exists between terminal 1 of connector A and terminal 1 of connector C.
2. Disconnect connector B and measure the resistance between the connectors.
If your results match the examples above, an open circuit exists between terminal 1 of connector B2 and terminal 1 of connector C.