Avalon V6-3.5L (2GR-FE) (2006)
Rain Sensor: Service and Repair
RAIN SENSOR
REPLACEMENT
1. REMOVE RAIN SENSOR COVER
a. Release the 2 claws and remove the rain sensor cover.
2. REMOVE RAIN SENSOR
a. Pull out the stopper as shown in the illustration, and release the lock.
b. Disconnect the connector and remove the rain sensor.
3. INSTALL RAIN SENSOR TAPE
a. Peel off the releasing sheet (yellow side) and attach the rain sensor tape to the position indicated in the illustration (the sensor part of the rain
sensor) while pushing out air bubbles with your fingers.
b. Peel off the releasing sheet (white side).
NOTE:
-
When reusing the rain sensor, clean dirt off the sensor part with a cloth, etc.
-
Do not touch the adhesive surface directly with your fingers.