Avalon V6-3.5L (2GR-FE) (2006)
4. Test drive the vehicle to confirm proper vehicle operation and ECM (PCM) learning.
Refer to TIS applicable model year Avalon Camry or Solara Repair Manual:
5. Install the Authorized Modifications Label.
A. Using a permanent marker enter the following information on the label:
^
ECM part number [Refer to the Parts In formation section for the CURRENT PART NUMBER]
^
Calibration ID(s) [Refer to the Calibration Identification Chart for the NEW CALIBRATION ID]
^
Dealer Code
^
Repair Date
^
Change Authority [This TSB number]
B. Affix the Authorized Modifications Label to the vehicle at the location shown in Figure 2. The Authorized Modifications Label is available
through the MDC P/N 00451-00001-LBL.