Avalon XL V6-3.0L (1MZ-FE) (1997)
Wheel Speed Sensor: Service and Repair
Front
Front Speed Sensor Components
FRONT SPEED SENSOR
REMOVAL
Disconnecting Front Speed Sensor Connector
1. Disconnect Speed Sensor connector.
(a) Remove the fender liner.
(b) Disconnect the Speed Sensor connector.
2. Remove Speed Sensor.
Removing Clamp Bolts On Sensor Harness
(a) Remove the 3 clamp bolts holding the sensor harness to the body and Shock Absorber.
Torque: 5.4 Nm (48 inch lbs.)
(b) Remove the Speed Sensor from the Steering Knuckle.
Torque: 7.8 Nm (69 inch lbs.)
INSTALLATION
Installation is in the reverse order of removal.
NOTE: After installation, check Speed Sensor signal.