Avalon XL V6-3.0L (1MZ-FE) (1997)
Connecting Rod: Testing and Inspection
Connecting Rod Alignment
Using a rod aligner and feeler gauge, check the connecting rod alignment.
1. Check for bend.
Maximum bend: 0.05 mm (0.0020 inch) per 100 mm (3.94 inch)
If bend is greater than maximum, replace the connecting rod assembly.
2. Check for twist.
Maximum twist: 0.15 mm (0.0059 inch) per 100 mm (3.94 inch)
If twist is greater than maximum, replace the connecting rod assembly.