Avalon XL V6-3.0L (1MZ-FE) (1997)
Crankshaft Main Bearing: Specifications
SERVICE SPECIFICATIONS
Standard oil clearance:
Maximum clearance:
If the oil clearance is greater than maximum, replace the bearings. If necessary, replace the crankshaft.
HINT: If using a bearing, replace it with one having the same number. If the number of the bearing cannot be determined, select the correct bearing
by adding together the numbers imprinted on the cylinder block and crankshaft, then refer to the table below for the appropriate bearing number. The
No. 1 and No. 4 journal bearings have 5 standard bearing sizes, marked "3", "4", "5", "6" and "7" accordingly. The No.2 and No.3 journal bearings
have 5 standard bearing sizes, marked "1", "2", "3", "4" and "5" accordingly.
No.1 and No.4 journal bearings