Avalon XL V6-3.0L (1MZ-FE) (1997)
/Page-2372002.png)
-
If response is too slow, turn the knob clockwise.
6. INSPECT SENSOR CIRCUIT
Connector Disconnected
Disconnect the connector from the sensor and inspect the connector on the wire harness side, as shown in the chart.
If the circuit is as specified, perform the following inspection.
If the circuit is not as specified, inspect the circuit connected to other parts.
Connector Connected
Connect the wire harness side connector to the sensor and inspect wire harness side connector from the back side. as shown.
If the circuit is as specified, try replacing the sensor with new one.
If the circuit is not as specified, inspect the circuit connected to other parts.
