Avalon XL V6-3.0L (1MZ-FE) (1997)
ND: PK20TR11
NGK: BKR6KPB11
5. INSPECT ELECTRODE GAPS
Maximum electrode gap for used spark plug:
1.3 mm (0.051 in.)
If the gap is greater than maximum, replace the spark plug.
Correct electrode gap for new spark plug:
1.1 mm (0.043 in.)
NOTICE: If adjusting the gap of a new spark plug. bend only the base of the ground electrode. Do not touch the tip. Never attempt to adjust the
gap on the used plug.
6. CLEAN SPARK PLUGS
If the electrode has traces of wet carbon, allow it to dry and then clean with a spark plug cleaner.
Air pressure:
Below 588 kPa (6 kgf/sq.cm. 85 psi)
Duration: 20 seconds or less
HINT: If there are traces of oil, remove it with gasoline before using the spark plug cleaner.
7. REINSTALL SPARK PLUGS
Using a 16 mm plug wrench, install the 6 spark plugs to the RH and LH cylinder heads.
Torque: 18 N.m (180 kgf.cm, 13 ft.lbf)
8. REINSTALL IGNITION COILS