Avalon XL V6-3.0L (1MZ-FE) (1997)
If the runout is not within the specification or ring gear is damaged, replace the drive plate.
Torque: 83 Nm (850 kgf-cm, 61 ft. lbs.)
3. MEASURE TORQUE CONVERTER CLUTCH SLEEVE RUNOUT
a. Temporarily mount the torque converter clutch to the drive plate. Set up a dial indicator and measure the torque converter clutch sleeve runout.
Maximum runout: 0.30 mm (0.0118 inch)
If the runout is not within the specification, try to correct by reorienting the installation of the converter clutch.
HINT: Mark the position of the converter clutch to ensure the correct installation.
b. Remove the torque converter clutch.