Avalon XLS V6-3.0L (1MZ-FE) (1998)
b. Connect the front of the oil cooler outlet hose to the oil cooler pipe on the left side of the radiator.
NOTE:
Install the hose clamp, positioned as indicated in illustrations, and use pliers to remove the clips.
c. Connect the transmission oil cooler hose No. 2 to the oil cooler outlet pipe on the transaxle as shown.
NOTE:
Install the hose clamp, positioned as indicated in illustrations, and use pliers to remove the clips.
7.
Install Oil Cooler
a. Install the clamp (P/N 33495-41010) using bolt (P/N 90119-06518) to the hood lock support (see arrow).
Torque: 62 in.lbf (71 kgf.cm, 7 Nm)