Avalon XLS V6-3.0L (1MZ-FE) (1998)
![background image](/toyota/avalon_xls/v6-3.0l_(1mz-fe)/Page-648002.png)
AFTER INSTALLATION, ADJUST WATER VALVE CONTROL CABLE
a. Auto A/C Models Only:
Turn ignition switch ON.
b. Set the temperature control dial at "COOL" position.
c. Set the water valve control lever to "COOL" position and install the control cable and lock the clamp.
HINT: Lock the clamp during lightly pushing the outer cable in the direction as shown in the illustration by an arrow.