Avalon XLS V6-3.0L (1MZ-FE) (1998)
![background image](/toyota/avalon_xls/v6-3.0l_(1mz-fe)/Page-2416002.png)
INSPECT DOOR OUTSIDE HANDLE SWITCH CONTINUITY
If continuity is not as specified, replace the switch.
w/ Sliding roof:
INSPECT ROOM LIGHT ASSEMBLY CONTINUITY
a. Disconnect the connector from room light assembly.
b. Turn the room light switch ON, check that there is continuity between terminal 2 and body ground.
c. Turn the room light switch DOOR, check that there is continuity between terminal 1 and 2.
If operation is not as specified, replace the switch.
w/o Sliding roof:
INSPECT ROOM LIGHT ASSEMBLY CONTINUITY
a. Disconnect the connector from room light assembly.
b. Turn the room light switch ON, check that there is continuity between terminal 2 and body ground.