Avalon XLS V6-3.0L (1MZ-FE) (1998)
d. Adjust the park/neutral position switch.
e. Install the transaxle control shaft lever and washer.
f.
Install and torque the nut.
Torque: 15 Nm (150 kgf-cm, 11 ft. lbs.)
g. Install the control cable and nut.
Torque: 15 Nm (150 kgf-cm, 11 ft. lbs.)
h. Install the clip to the shift control cable.
4. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
5. TEST DRIVE VEHICLE