Avalon XLS V6-3.0L (1MZ-FE) (1998)
Transmission Speed Sensor: Service and Repair
DIRECT CLUTCH SPEED SENSOR
ON-VEHICLE REPAIR
1. REMOVE AIR CLEANER ASSEMBLY
2. DISCONNECT DIRECT CLUTCH SPEED SENSOR CONNECTOR
3. REMOVE DIRECT CLUTCH SPEED SENSOR
a. Remove the bolt and direct clutch speed sensor.
b. Remove the O-ring from direct clutch speed sensor.
4. INSTALL DIRECT CLUTCH SPEED SENSOR
a. Coat a new O-ring with ATF and install it to the direct clutch speed sensor.
b. Install the direct clutch speed sensor with the bolt.
Torque: 11 Nm (110 kgf-cm, 8 ft. lbs.)
5. CONNECT DIRECT CLUTCH SPEED SENSOR CONNECTOR
6. INSTALL AIR CLEANER ASSEMBLY