Avalon XLS V6-3.0L (1MZ-FE) (1998)
![background image](/toyota/avalon_xls/v6-3.0l_(1mz-fe)/Page-1769001.png)
Alternator: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE REAR END COVER
a. Remove the nut and terminal insulator.
b. Remove the screw, 3 nuts, plate terminal and end cover.
2. REMOVE BRUSH HOLDER AND VOLTAGE REGULATOR
a. Remove the brush holder cover from the brush holder.
b. Remove the 5 screws, brush holder and voltage
3. REMOVE RECTIFIER HOLDER
a. Remove the 4 screws and rectifier holder.
b. Remove the 4 rubber insulators.
c. Remove the seal plate.
4. REMOVE PULLEY