Avalon XLS V6-3.0L (1MZ-FE) (1998)
COMPONENTS
REMOVAL
1. REMOVE BATTERY AND TRAY
2. w/ CRUISE CONTROL SYSTEM:
REMOVE CRUISE CONTROL ACTUATOR
a. Disconnect the actuator connector and clamp.
b. Remove the 3 bolts, and disconnect the actuator with the bracket.
3. REMOVE STARTER
a. Disconnect the starter connector.
b. Remove the 2 bolts and starter.
c. Remove the nut, and disconnect the starter cable.
Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)
INSTALLATION
Installation is in the reverse order of removal.