Avalon XLS V6-3.0L (1MZ-FE) (1998)
![background image](/toyota/avalon_xls/v6-3.0l_(1mz-fe)/Page-1831004.png)
b. Install the 2 clamp plates and 2 holders to the tube.
c. Tighten the bolt.
d. Install the 2 clamp plate set nuts.
Torque 7.8 Nm (69 inch lbs.).
5. Connect return hose.
Connect the tube with the clip.
6. Install RH front fender apron seal.
Tighten the 2 bolts.
7. Bleed power steering system.