Avalon XLS V6-3.0L (1MZ-FE) (1998)
/Page-1854008.png)
c. Using SST 09950 - 60010 (09951 - 00180, 09951 - 00320, 09952 - 06010), 09950 - 70010 (09951 - 07200), press in the oil seal.
NOTICE Make sure to install the oil seal facing the correct direction.
d. Coat a new bearing with molybdenum disulfide lithium base grease.
e. Using SST 09950 - 60010 (09951 - 00180, 09951 - 00340, 09952 - 06010), 09950 - 70010 (09951 - 07200), press in the bearing.
3. If necessary, replace 2 bearings.
a. Using a brass bar and hammer, tap out the bearing from the rack housing.
b. Using SST 09950 - 60010 (09951 - 00260), 09950 - 70010 (09951 - 072003, press out the bearing from the rack housing.
c. Coat a new bearing with molybdenum disulfide lithium base grease.
