Camry L4-1995cc 2.0L SOHC (2S-E) (1984)
7.
Disconnect the black wire from the igniter.
8.
Discard the igniter.
Replacement of Igniter
Replacement of Igniter
1.
Attach black wire to the igniter.
2.
Install new igniter using two new retaining screws.
3.
Install the pick-up coil (signal generator) lead wire as indicated below.
NOTE:
There are two types of terminals on pick-up coil lead wires.
4.
Insert pink and white wires into clamp as illustrated.
Separate Nut Terminal
Separate Nut Terminal
Twist lead wires as illustrated, then install white wire terminal first onto the pick-up coil side igniter terminal.