Camry L4-1995cc 2.0L SOHC (2S-E) (1984)
![background image](/toyota/camry/l4-1995cc_2.0l_sohc_(2s-e)/Page-425001.png)
Cold Start Injector Time Switch: Testing and Inspection
Fig. 35 Typical start time injector switch testing
1.
Disconnect electrical connector from switch and measure resistance between terminals, Fig. 35.
2.
Meter should read 30 - 50 ohms with coolant temperature below 95°F and 70 - 90 ohms with temperature above 95°F).
3.
Measure resistance between STA and ground. Meter should read 30 - 90 ohms.
4.
If readings are not as specified, switch is defective.