Camry L4-1995cc 2.0L SOHC (2S-E) (1984)
IGNITER
III. IGNITER INSPECTION PROCEDURE
1.
Disconnect the green wire connector from the distributor assembly.
2.
Disconnect the spark plug wires at the spark plugs.
CAUTION:
Be careful not to drop the screws or nuts in the distributor.
Do not pull excessively on the wires or connectors.
3.
Remove the distributor cap.
4.
Check igniter identification marks.
IV. Igniter Identification Marks
IGNITER IDENTIFICATION MARKS