Camry L4-1995cc 2.0L SOHC (2S-E) (1984)
Trailing Arm: Service and Repair
Fig. 9 Rear suspension. Camry, Tercel & Corolla w/front wheel drive
1.
Raise and support rear of vehicle.
2.
Remove bolt and nut securing suspension arm No. 2 to axle carrier, Fig. 9.
3.
Scribe alignment marks on suspension arm No. 2 alignment cam plate to aid during installation, then remove bolt securing suspension arm No. 2 to
body and remove arm. When removing bolt securing suspension arm to body, turn the bolt only. Do not turn the cam.
4.
Remove bolt and nut securing suspension arm No. 1 to axle carrier, Fig. 9.
5.
Remove bolt and nut securing suspension arm No. 1 to body, then remove arm.
6.
Replace bushings with tool 09726-32010.
7.
Reverse procedure to install. Torque all bolts to 64 ft. lbs. with vehicle weight on suspension.