Camry L4-2.4L (2AZ-FE) (2005)
/Page-405002.png)
(h) Install the radiator cap.
(i) Warm up the engine until the thermostat valve begins to open.
HINT: As the engine warms up, press the radiator inlet and outlet hose several times by hand.
(j) Stop the engine and wait until the coolant cools down to room temperature. If the coolant is below the full line, add coolant.
(k) Install the radiator cap and check the radiator reservoir tank coolant level. If it is below the full line, add coolant.
3. CHECK FOR ENGINE COOLANT LEAKS
(a) Fill the radiator with coolant and attach a radiator cap tester.
(b) Pump it to 118 kPa (1.2 kgf/cm2, 17.1 psi) and check leakage.
