Camry L4-2.4L (2AZ-FE) (2005)
Piston Ring: Specifications
INSPECT RING GROOVE CLEARANCE
Using a feeler gauge, measure the clearance between the piston ring and the wall of the ring groove.
Ring groove clearance .................................................................................................................................. 0.030 to 0.070 mm (0.0012 to 0.0028 inch)
INSPECT PISTON RING END GAP
Using a piston, push the piston ring a little beyond the bottom of the ring travel, 110 mm (4.33 inch) from the top of the cylinder block.
Specified end gap