Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2755021.png)
90. REMOVE ROOF SIDE INNER GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
91. REMOVE ROOF SIDE INNER GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
92. REMOVE ROOF CONSOLE BOX ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
93. REMOVE VISOR ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining/Removal
94. REMOVE VISOR ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.
95. REMOVE VISOR HOLDER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining/Removal
96. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
97. REMOVE REAR ASSIST GRIP SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
98. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (w/o Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining/Removal
99. REMOVE SPOT LIGHT ASSEMBLY (w/ Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof
Headlining/Removal
100. REMOVE SUN ROOF OPENING TRIM MOULDING (w/ Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining/Removal
101. REMOVE ROOF HEADLINING ASSEMBLY (w/o Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining/Removal
102. REMOVE ROOF HEADLINING ASSEMBLY (w/ Sliding Roof) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining/Removal
103. REMOVE ANTENNA CORD SUB-ASSEMBLY
(a) Peel the strips of the tape used to secure the antenna cord only to the extent that allows removal of the antenna cord.
HINT: Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.
(b) Remove the antenna cord from the roof headlining.