Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-2815001.png)
Navigation Display: Service and Repair
Removal
From 03-2006 to 10-2006
NAVIGATION: MULTI-DISPLAY: REMOVAL
REMOVAL
1. EJECT MAP DISC
(a) Turn the power switch on (ACC).
(b) Push the "CLOSE" button.
(c) Touch "MAP EJECT" on the navigation screen to eject the map disc.
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (From 03-2006 to 10-2006)/Removal
3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (From 03-2006 to 10-2006)/Removal
4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (From 03-2006 to 10-2006)/Removal
5. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (From 03-2006 to 10-2006)/Removal
6. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (From 03-2006 to 10-2006)/Removal
7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal and Replacement/Instrument Panel Safety Pad (From 03-2006 to 10-2006)/Removal
8. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (From 03-2006 to 10-2006)/Removal
9. REMOVE NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY
(a) Remove the 4 bolts.
(b) Pull the navigation receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.
(c) Disconnect each connector and remove the navigation receiver with heater control panel assembly.
10. REMOVE RADIO NO. 1 BRACKET
(a) Remove the 5 bolts and radio No. 1 bracket.
11. REMOVE RADIO NO. 2 BRACKET