toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

A/C - Rear Vents Blow Hot Air With A/C ON|Page 9724 > < A/C - Rear Vents Blow Hot Air With A/C ON|Page 9722
Page 4
background image

A.

For TMC-built (CBU) vehicles:

(1)

Disconnect the connector.

(2)

Remove the 2 screws and blower assembly.

B.

For TMMK-built vehicles:

(1)

Using a 4-mm hexagon wrench, remove the 2 hexagon bolts and the cooler expansion valve.

(2)

Remove the connector and clamp, and disconnect the wire harness.

A/C - Rear Vents Blow Hot Air With A/C ON|Page 9724 > < A/C - Rear Vents Blow Hot Air With A/C ON|Page 9722