toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal and Replacement|Page 10302 > < Removal and Replacement|Page 10300
Page 19
background image

(a) Remove the 3 screws and quick heater assembly.

6. REMOVE AIR OUTLET CONTROL SERVO MOTOR

(a) Disconnect the 2 connectors and remove the air conditioner harness.
(b) Remove the 3 screws and then remove the air outlet control servo motor.

7. REMOVE AIR MIX CONTROL SERVO MOTOR

(a) Remove the 2 screws and air mix control servo motor.

8. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

(a) Remove the screw and clamp.
(b) Release the 4 claws and remove the clamp.

(c) Remove the heater radiator unit sub-assembly from the air conditioning radiator assembly.

NOTICE:  Prepare a drain pan or cloth in case the coolant water leaks.

Removal and Replacement|Page 10302 > < Removal and Replacement|Page 10300