Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
CAUTION: Wear insulated gloves.
b. Connect the wire harness with the 3 clamps.
CAUTION: Wear insulated gloves.
c. Connect the AMD cable with the nut.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
CAUTION: Wear insulated gloves.
d. Connect the high voltage cable with the nut.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
CAUTION: Wear insulated gloves.
3. CONNECT HV RELAY ASSEMBLY
a. Connect the 5 connectors to the HV relay assembly.
CAUTION: Wear insulated gloves.
NOTE:
-
Connect the wire wrapped with red tape to the terminal indicated by the "+" mark of the HV relay and the wire not wrapped with red tape
to the terminal indicated by the "-" mark of the HV battery.
-
Make sure that the connectors are engaged securely.
b. Connect the ground cable with the nut.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)