Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
![background image](/toyota/camry/l4-2.4l_(2az-fxe)_hybrid/Page-3202006.png)
(a) Disconnect the F3 connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE