Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
![background image](/toyota/camry/l4-2.4l_(2az-fxe)_hybrid/Page-2195003.png)
4.
Remove the Junction Block assembly from the Junction Block housing.
HINT
Depress both clips simultaneously while lifting up on the Junction Block
5.
Remove the Junction Block and disconnect the 4 connectors.
6.
Install the NEW Junction Block.
Installation is the reverse order of removal.
7.
Reconnect the negative (-) battery terminal.
8.
Verify normal operation of the Daytime Running Lights.