Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1354036.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
HINT: Measure the resistance with No. 2 CAN J/C connector A40 disconnected.
OK -- REPLACE SKID CONTROL ECU ASSY
NG -- REPLACE SKID CONTROL ECU BRANCH WIRE OR CONNECTOR
10. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (HV CONTROL ECU)
(a) Disconnect HV control ECU connector A61.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance: