Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1354038.png)
(a) Disconnect No. 2 CAN J/C connector E41 (front of the vehicle).
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- CHECK FOR SHORT TO B+ IN CAN BUS WIRE (RADIO AND NAVIGATION ASSEMBLY)
OK -- REPLACE ACCESSORY GATEWAY BRANCH WIRE OR CONNECTOR
13. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (A/C AMPLIFIER)
(a) Disconnect A/C amplifier connector E38.
