Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1354052.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE CAN BUS MAIN WIRE OR CONNECTOR (HV CONTROL ECU - NO. 2 CAN J/C)
OK -- REPLACE ACCESSORY GATEWAY BRANCH WIRE OR CONNECTOR
10. CHECK FOR SHORT TO GND IN CAN BUS WIRE (SKID CONTROL ECU)
(a) Disconnect skid control ECU connector A74.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
OK -- REPLACE SKID CONTROL ECU ASSY
NG -- REPLACE SKID CONTROL ECU BRANCH WIRE OR CONNECTOR