Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1482001.png)
Vacuum Switch: Testing and Inspection
2AZ-FXE EMISSION CONTROL: VACUUM SWITCHING VALVE: INSPECTION
INSPECTION
1. INSPECT VACUUM SWITCHING VALVE
(a) Measure the resistance of the purge VSV.
Standard resistance:
If the result is not as specified, replace the purge VSV.
(b) Check the operation of the purge VSV.
(1) Check that air does not flow from port E to port F.
(2) Apply battery voltage across the terminals.
(3) Check that air flows from port E to port F.
If the result is not as specified, replace the purge VSV.