Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(a) Disconnect the C64 hybrid vehicle control ECU connector.
(b) Measure the resistance between the terminal and body ground.
Standard resistance:
(c) Reconnect the hybrid vehicle control ECU connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK ENGINE ROOM JUNCTION BLOCK (IGCT RELAY VOLTAGE)
(a) Remove the engine room junction block from the engine room R/B.
(b) Turn the power switch on (IG).
(c) Measure the voltage between the terminal and body ground.
Standard voltage:
OK -- INSPECT IGCT RELAY
NG -- Continue to next step.
3. INSPECT IGCT FUSE