Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1152001.png)
Coolant Temperature Sensor/Switch (For Computer): Testing and Inspection
2AZ-FXE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSPECTION
INSPECTION
1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR
(a) Using an ohmmeter, measure the resistance between the terminals.
Standard resistance:
If the result is not as specified, replace the sensor.
NOTICE: In case of checking the water temperature sensor in water, do not allow water to go into the terminals. After checking, dry the
sensor.