Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(a) Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt hole cover.
HINT: Tape the screwdriver tip before use.
22. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
(a) Disconnect the connector.
(b) Disengage the 4 clips and the 5 claws.
(c) Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly, then remove the package tray trim panel assembly.
23. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
(a) Remove the bolt and the rear seat inner with center belt assembly LH.
From 03-2006 to 10-2006
SEAT BELT: REAR SEAT INNER BELT ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
(a) Check the degree of the tilt when the ELR begins to lock.