Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-524001.png)
Ignition Switch: Testing and Inspection
2AZ-FXE STARTING: POWER SWITCH: INSPECTION
INSPECTION
1. INSPECT POWER SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the power switch.
(b) Apply battery voltage between the terminals of the switch, and check the illumination condition of the switch.
Standard resistance:
If the result is not as specified, replace the power switch.
