Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(f) Tighten the nuts.
Torque: 210 Nm (2,141 kgf-cm, 155ft-lbf)
NOTICE: Keep the bolts from rotating when tightening the nuts.
(g) Install the front wheel.
Torque: 103 Nm (1,050 kgf-cm, 76ft-lbf)
(h) Check the camber.
If the measured value is not within the specification, calculate the required adjustment amount using the formula below.
Camber adjustment amount = center of the specified range center - measured value
Check the combination of installed bolts. Select appropriate bolts from the table below to adjust the camber to the specified values.
HINT: Try to adjust the camber to the center of the specified values.