Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
![background image](/toyota/camry/l4-2.4l_(2az-fxe)_hybrid/Page-1793005.png)
(c) Using a snap ring expander, install a new drive shaft hole snap ring.
2. INSTALL FRONT DRIVE SHAFT DUST COVER
(a) Using SST and a press, install a new drive shaft dust cover.
SST: 09726-40010
SST: 09527-10011
Distance (A):
41.6 to 42.6mm (1.6378 to 1.6772in.)
NOTICE:
-
The dust cover should be completely installed.
-
Be careful not to damage the dust deflector.
3. INSTALL FRONT DRIVE SHAFT DUST COVER RH
(a) Using SST and a press, install a new drive shaft dust cover RH until distance (A) from the tip of the center drive shaft to the drive shaft dust
cover RH meets the specification.
SST: 09527-10011
Distance (A):
110.0 to 111.0 mm (4.3307 to 4.3701 in.)
NOTICE:
-
The dust cover should be completely installed.
-
Be careful not to damage the dust deflector.
4. INSTALL FRONT DRIVE SHAFT DUST COVER LH