Camry V6-3.0L (1MZ-FE) (2004)
c. Connect the 2 vacuum hoses.
d. Connect the fuel vapor feed hose No. 2.
e. Connect the fuel vapor feed hose No. 1.
f.
Install the wire harness clamp.
g. Connect the 2 VSV connectors.
19. INSTALL AIR CLEANER ASSEMBLY WITH HOSE
20. INSTALL FRONT SUSPENSION UPPER BRACE CENTER (W/ FRONT SUSPENSION BRACE UPPER CENTER)
Torque: 80 Nm (816 kgf-cm, 59 ft. lbs.)
21. INSTALL RADIATOR HOSE INLET
22. INSTALL V-BANK COVER SUB-ASSY
a. Fit the 2 retainers and install the V-bank cover.
b. Using a socket hexagon wrench 5, tighten the 3 nuts.
Torque: 7.9 Nm (81 kgf-cm, 70 inch lbs.)
23. INSTALL FRONT FENDER APRON SEAL RH
24. ADD ENGINE COOLANT
25. CHECK FOR ENGINE COOLANT LEAKS